Thermacare® is a convective patient warming system designed to help prevent hypothermia and maintain normothermic temperature in the OR, PACU and ICU. The lightweight, portable Warm Air Blower unit offers 4 temperature settings. The Blower Unit is used with Thermacare Quilts that come in six versatile configurations, with ample dimensions to accommodate any patient.
The EQUATOR® Convective Warming System provides Controlled Convective Warming in a compact design. The patented temperature control system ensures the desired therapy setting, while the high air flow distributes the heat across the blanket. Snuggle Warm® Convective Warming Blankets are soft, flexible and durable, and cover a variety of clinical applications including partial and full body warming for all applications.
The Blanketrol® III hypo-hyperthermia system features a programmable and pre-set variable gradient temperature selection in both the cooling and heating mode to allow for rapid or gradual patient temperature management control and helps to address temperature overshoot. The patent-pending SMART feature included with the gradient setting offers the ability to have the BIII adjust the gradient temperature settings by five degrees C should the clinician not reach the desired patient temperature within 30 minutes.
The Micro-Temp LT Model 749 Localized Heat Therapy System provides the superior accuracy, quiet operation and rapid warming. The unit is lightweight and portable and is equipped with both audible and visual safety alerts for tighter overshoot protection. The MicroTemp LT also meets the new UL60601-1 safety standards.
The PRN ThermalCare provides a single system approach to total patient warming. The systems unique, patented design provides both patient warming with heated pressure reduction OR table pads while making available the feature of heating IV Fluids and Irrigation Fluids without adding added clutter and equipment to the Operating Room.
The BAIR HUGGER® MODEL 585 Lithotomy Underbody Blanket offers a new approach to warming patients undergoing procedures involving the pelvic cavity, including C-sections, colorectal surgery, TURPs and others requiring peritoneal, abdominal or low limb access. The blanket is designed to be positioned on the procedure table before the patient even arrives.
The “Titan” support is engineered to increase the weight capacity of wall mounted toilets from 350 pounds to over 1000 pounds, allowing bariatric surgical facilities to protect clients from accidents and the facilities from costly repair. The “Titan” works in conjunction with existing wall mounted toilet systems, letting the system to “flex” as originally designed, yet providing additional support as needed.
EPS recently released two filter needles with 18 and 20 gauge needles (1 ½”) for use with multi-dose IV vials and a filter aspirator with a three inch blunt needle for administering and dispensing medication from ampules. These Filter Needles and the Filter Aspirator have 5 micron filters to minimize the potential of particulate being dispensed.
The Kimberly-Clark MICROCUFF Endotracheal Tube is an airway management device designed to reduce the leakage of potentially infectious secretions into the lungs. The tube’s superior sealing capability of the is created by a unique cuff that is made with an advanced micro-thin polyurethane material.
The PDW-70MD XDCAM HD is an optical HD recorder designed to capture and store high-definition video of medical procedures in 1440 x 1080i resolution. The device can record and store up to two hours on a 23 GB PFD-23 XDCAM® disc, which is sealed to help prevent scratches and preserve data with minimal degradation for more than 50 years.
The Dale® Bendable ArmBoard for stabilizing and securing IV and arterial lines can be bent and re-shaped many times and has a soft, padded cover for comfortably holding a patent’s wrist in any desired position. Featuring two soft elasticized straps that attach using Velcro®, this all-in-one system eliminates taping and allows easy access to the radial artery.
The MOBILETT XP CR mobile X-ray unit features an integrated computed radiography (CR) reader. The unit was designed to meet the complicated challenges facing today’s healthcare providers and to help facilities optimize workflow by enabling bedside imaging. The integrated monitor provides high quality image display for first image review and image archiving right at the patient’s bedside.
Booth # 4237 Simulab has earned its reputation as the industry leader in custom solutions for medical education, product demonstration, and patient orientation. The company has designed, engineered and manufactured an extensive line of products and solutions by leveraging our complete inventory of bone models and its unique knowledge of materials.
Black Perf Wrist Splints for injured or weak wrists are available in 8- and 10-inch lengths. These wrist splints feature a slip on design for easy application and a malleable metal palmar stay for extra support. The splints do not extend past the palmar crease, which allows for a full range of finger motion.
These cold packs are durably constructed of three layers: a soft outer, an absorbent middle and an impervious inner plastic bladder. The absorbent layer lessens the patient’s exposure to perspiration from the bladder as the ice melts. The secure plastic clip is completely enclosed within the ice bag, and is securely attached to the bag by a plastic sleeve or “clip-slip.